English version
Bimetalni tračni listi za razrez kovine Håkansson
 Kvaliteta:
 Bimetal M42

 Poreklo:
 Švedska
 
Proper blade selection
As a rule it is always best to use a blade with maximum possible width, since heavier feeding can then be used, due to the improved beam strength of the wider blade. On the other hand, the thickness is limited by the diameter of the wheels of the bandsaw machine.
Too small a diameter of the wheels in relation to the band’s thickness will cause band breakage.
Installation of band saw blades
Place the blade on the wheels and adjust to normal running position. Adjust the tension of the blade. Incorrect blade tension will result in great waste of blades. If possible use a tension gauge.
Most machine manufacturers will recommend the proper tension for their machines. The bandsaw machine should be adjusted to the blade.
The wheels should be aligned with the blade guides for proper tracking of the blade. It is very important that the guides and the rear bearings are kept in good condition and should be replaced as soon as they are worn.
Make sure that your wire brush (or equivalent) is in good working condition for cleaning of the tooth gullet.
Variable tooth, Bi-Metal blades
Blades with variable teeth have different tooth pitches on the same blade and are recommended for cutting tubing and structural material but can also be used for solid materials.

Bi-Metal blades combine the advantages of a high speed cutting edge and the features of a highly fatigue resistant steel in the body of the blade. This contributes to longer blade life, faster and more uniform cutting rates.
Hakansson world-renowned heat treating experience gives an excellent background to the development of this type of blade.

High speed steel has been used for a long time in the cutting tool industry and it contains tungsten, molybdenum, chrome, cobalt and vanadium. These alloys form, together with the carbon, hard and wear resistant carbides.
The use of high speed steel in band saw blades made it possible to considerably increase production when cutting hard materials.
 
Environmental policy
Håkansson Sågblad AB, which manufactures bandsaw blades, works constantly to bring about improvements by developing our operations with regard to their environmental impact in respect of emissions, waste and the utilisation of resources. This development takes place in accordance with applicable environmental laws and requirements, and on the basis of internal and external expectations.
This means:
  • That we comply with environmental legislation and jealously guard our good name

    •
  • That we are constantly implementing improvements that tie in with quality requirements and the demands of our customers

    •
  • That development and investments take place while maintaining an overall view of environmental considerations, financial opportunity and new technical options

    •
  • That we regularly assess our operations from an environmental perspective in order to find areas we can improve upon
    		•